1.76 FL.OZ Metal Bonding Adhesive Plastic Bonding Epoxy Glue for Metal to Metal, Metal to Plastic, Ceramics, Filler for Automotive Marine Repair (3)

1.76 oz EPOXY GLUE; A two-part epoxy resin cold welding system cures quickly in 5 minutes and fully cures in 24 hours for stong, long lasting repairs on metal or any other surface applications.

Ⅰ. This is a two component heavy duty high temperature resistant epoxy glue with mayonnaise consistency and 1.76oz capacity, allows thin application, fixed ratio (1:1) syringe, non-toxic and non-irritating odor. It offers excellent adhesion to a wide range of materials that are difficult to bond with, including concrete, ceramics, woods, metals and plastics. Protects against thermal and mechanical shocks. Strong resistance to humidity, salt water, acids, bases, and aliphatic hydrocarbons.
Ⅱ. 5 minutes to set, 24 hours to fully curing, can be different materials welded together at the same time, such as metal aluminum, copper, iron, stainless steel, wood, plastic, glass, cured strength up to 4680PSI, can be stable between -65 ℃ ~ 287 ℃, cured gray, can be drilled, sanded, spray paint coloring, so that your items repaired to the original appearance.
Ⅲ. Excellent impact resistance and strength make if your car or boat has cracks or holes, then choose this epoxy resin welding adhesive is your best choice! It’s also great for repairing, fastening radiators, water pipes, tanks, pools, oil drums, cracks in bumpers or motorcycle fairings, broken headlight brackets, torn RV paneling fences, vases, swings, and other everyday items.
Ⅳ. With its wide range of applications, excellent properties and almost ultimate cost performance, this epoxy glue can meet your needs in most usage scenarios at a very low cost and with guaranteed good quality.
Ⅴ. Use the pusher to push out the appropriate amount of glue on a flat surface, use the stirrer to mix it evenly (usually 5 minutes, if not, it will affect the bonding effect), then apply the mixture to the clean surface of the material to be bonded, place the parts to be welded in the appropriate position as needed, and leave it horizontally for 24 hours!!! (For pressurized items, it is necessary to wait until they are completely solid before use)